EPON 1GE ONU ZTE chipset

EPON 1GE ONU ZTE chipset

Overview

1GE EPON ONU is one of the EPON optical network unit designs that meet the requirements of broadband access networks. It is used in FTTH / FTTO for data and video services based on EPON networks.EPON is the latest generation of access network technology.Based on ZTE's high-performance EPON access chipset. Provide 1 GE adaptive Ethernet port. Support bridge and routing modeThese features feature high-performance forwarding to ensure an excellent Internet and HD video service experience. As a result, it provides the perfect terminal solution and future-proof service support for FTTH deployment. Good third-party compatibility when used with third-party OLTs such as Huawei/ZTE/ Fiberhome/BDCOM OLT.


Features

Full compatible with IEEE802.3ah 

Support port-based rate limitation and bandwidth control;

In compliant with IEEE802.3ah Standard

Up to 20KM transmission Distance

Support data encryption, group broadcasting, port Vlan separation , etc.

Support Dynamic Bandwidth Allocation (DBA)

Support ONU auto-discovery/Link detection/remote upgrade of software;

Support VLAN division and user separation to avoid broadcast storm;

Support power-off alarm function ,easy for link problem detection

Support broadcasting storm resistance function

Support port isolation between different ports

Support three layer routing functions

Support ACL and SNMP to configure data packet filter flexibly

Specialized design for system breakdown prevention to maintain stable system

Support software online upgrading

Product interface and LED definitions




 

 

Indicator

Description

1

PWR

Power status

On: The ONT is power on;

Off: The ONT is Power off;

2

PON

ONU Register

On: Success to register to OLT;

Blinking: In process of registering to OLT;

Off: In process of registering to OLT;

3

ALARM

EPON optical signals

Blinking: Optical power lower than receiver sensitivity ;

Off: Optical in normal

4

LAN

LAN port status

On: Ethernet connection is normal;

Blinking: Data is being transmitted through the Ethernet port;

Off: Ethernet connection is not set up;

Specification

Technical item

1GE EPON ONU

Chipset

ZTE

PON interface

1 EPON port (PX20+)
Wavelength:Tx1310nm,Rx 1490nm
SC/UPC connector
Receiving saturation:≥-8dBm
Receiving sensitivity: ≤-30dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM

LAN interface

1*10/100/1000M Full/Half, RJ45 connector

Operating condition

Temperature: -30℃+70℃
Humidity: 10%90%non-condensing

Storing
condition

Temperature : -30℃+70℃
Humidity :10%90%non-condensing

Power supply

DC 12V/0.5A

Power consumption

≤4W

Dimension

80mm(L) x80mm(W) x22mm (H)

 

Net weight

0.1

Software Parameters

Technical item

 

Basic

Support Bridge and Routing DHCP/PPPOE/Static IP
Support Static route
Support NATSupport MPCP discover&ister   
Support authentication Mac/Loid/Mac+Loid
Support Triple Churning
Support DBA bandwidth
Support auto-detecting, auto-configuration, and auto firmware upgrade  
Support authentication SN/Psw/Loid/Loid+Psw

Alarm

Support Dying Gasp
Support Port Loop Detect
Support Eth Port Los

LAN

Support Port rate limiting
Support Loop detection
Support Flow control
Support Storm control

VLAN

Support VLAN tag mode
Support VLAN transparent mode
Support VLAN trunk mode(max 8 vlans)
Support VLAN 1:1 translation mode(max 8 vlans)
Auto VLAN detection 

Multicast

Support IGMPv1/v2
Support IGMP Snooping 
Max Multicast vlan 8
Max Multicast Group 64

QoS

Support 4 queues
Support SP and WRR
Support 802.1P

Management

Support CTC OAM 2.0 and 2.1
Support ITUT984.x OMCI
Support WEB
Support TELNET
Support CLI

Throughput

Upstream >900Mbps
Downstream >960Mbps

 

Network Construction


Ordering information

Product Name

Product Model

Descriptions

 EPON ONU

1GE

1*GE Ethernet interface, 1 EPON interface, plastic casing, external power supply adapter